For reassembly, drop the mainspring and its plunger into the hole in the frame. Use a punch or small screwdriver to depress the plunger past the cross hole in the side of the frame. Then insert a punch through the cross hole while the plunger is below the cross hole. Ease pressure on the top punch to ensure the mainspring and plunger are caught by the punch through the cross hole.

Reinsert the safety through the odd-shaped hole in the frame:

IMG_0330

Insert the hammer pin through the left side of the frame, just far enough to go through the hole in the safety. The hammer pin shouldn’t protrude from the hole in the safety. You must maintain clearance between the end of the pin and the far side of the frame in order to drop the hammer into the frame:

You are viewing the text version of this site.

To view the full version please install the Adobe Flash Player and ensure your web browser has JavaScript enabled.

Need help? check the requirements page.


Get Flash Player